GAS EQUIPMENT : GAS MIG/TIG : MIG/TIG REGULATORS

Specifically designed for the economical control of inert shielding gases, these regulators have now been updated for 300 bar service with high performance advanced gas control.

Arc-35L & CO²-35L

These two gauge single-stage regulators will cope with the majority of MIG/MAG welding applications and are small enough to sit within the circumference of the cylinder. Fitted with a flow gauge instead of the vulnerable bobbin type flowmeter, they have proved themselves ideal in the very rugged situations this equipment often has to withstand.

Ar-2TIG

This single-stage regulator has been preset at 2 bar (30psi) to give a constant performance. It has been designed specifically for Argon-Tig welding and can be used by itself or with a bobbin type flowmeter.

Argoshield Arc-40L

Proved to be the most economic regulator for use with Argon and Argon mixtures. The two stage design eliminates the surging of gases which is so wasteful. It will overcome the problem in the most economic and efficient manner. Fitted with a flow gauge which is coloured to indicate recommended flow rates, this regulator will cope with heavy duty service where high flow (up to 40l/m-80ft³/h) is required. The two stages and large diaphragm greatly reduce the possibility
of freezing.