|
|
|
|
OrigoCut 35i |
|
A ideal package that gives you fast and easy cutting of all materials that conduct electricity. A light weight repair and maintenance tool which is easy to use. Single phase with mains voltage of 230V.  |
|
|
|
LPH 50 |
|
The LPH 50 is designed for cutting of plates up to 12mm thick. On the front panel a cutting current of 30A or 50A can be selected, in order to match the power requirements to the cutting conditions. The LPH 50 is equipped with an air cooled torch, the PT 27, with 7.6m hose package.
|
|
|
|
Powercut 650 Plasmarc |
|
Powercut 650
is a very powerful plasma cutting package in a tough casing making
it suitable for most plasma cutting applications. Cuts mild steel
with quality from thin plate up to 16mm (severs 19mm). Also cuts
aluminium and stainless steel. |
|
|
|
Powercut 1500 Plasmarc |
|
The Powercut 1500 is a very powerful plasma cutting and gouging package in a tough casing making it suitable for most plasma cutting applications. Cuts mild steel from thin plate up to 40mm. Gouge grooves approx 8x8mm per straight run at a metal removal rate of approx 7.6kg/hr. Also cuts and gouges aluminium and stainless steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LPH 80 |
|
The LPH 80 is
designed for cutting of plates up to 25mm thick. On the front panel
the cutting currentcan be set in three steps of 40A, 60A or 80A,
in order to match the power requirements to the cutting conditions.
The LPH 80 is equipped with an air cooled torch, the PT 27, with
7.6m hose package. |
|
|
|
LPH 120 |
|
The LPH 120 is designed for cutting of plates up to 35mm thick. On the front panel the cutting current can be set in three steps of 60A, 90A or 120A, in order to match the power requirements to the cutting conditions. The LPH 120 is equipped with an air cooled torch, the PT 25, with 7.6m hose package
|
|
|
|
Powercut 875 Plasmarc |
|
Powercut 875
is a very powerful plasma cutting package in a tough casing making
it suitable for most plasma cutting applications. Cuts mild steel
with quality from thin plate up to 32mm and also cuts aluminium
and stainless steel. |
|
|
|
ESP-150 Plasmarc |
|
ESP-150 is a versatile, all encompassed heavy duty water cooled plama cutting and gouging system which is ideal for manual and mechanised applcations. Cuts mild steel up to 51mm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|