ACCESSORIES : ELECTRODE DRYING OVENS
DRYING OVENS AND QUIVERS
ALL MUREX PRODUCTS CONFORM TO THE RELEVANT LEGISLATION
The efficiency of welding electrodes can be seriously impaired if the coating of the electrode is allowed to get damp. Dampness causes water vapour to be generated in the arc shield and can adversely affect both the running properties of the electrode (by promoting excessive fierceness and spatter) and the quality of the weld (by creating porosity and piping).
Murex have a full range of drying ovens to suit many locations and needs.

 
HEATED QUIVERS
The quivers are designed for use on installations with 100 volt or 240 volt supply. The quiver will maintain an even temperature of 100 deg C dependant on the amount of electrodes stored. Complete with handle/stand.

Supply 110v or 110/240v AC 50/60Hz
Load 150 watts
Overall dimensions 120mm Wide x 500mm Deep x 110mm High
Weight empty 3 Kilo
Capacity 9Kg of welding electrodes
Part No 110v 1380485
Part No 110/240v 1380486

 
PORTABLE DRYING OVEN
This oven is designed for rugged site conditions, where they can be used as a holding or storage oven.

Temperature range 100-300 deg C, thermostatically controlled.
Supply 110/240volts (dual voltage)
Load 300 watts
Overall dimensions 175mm Wide x 610mm Deep x 210mm High
Internal dimensions 115mm Wide x 480mm Deep x 115mm High
Weight empty 10 Kilo
Capacity 13Kg of welding electrodes
Part No 1380083

 
STATIONARY OVENS
These ovens can be used as the sole means of drying or as the intermediary, until transferred to a portable oven or a quiver.

Temperature range 100-300 deg C, thermostatically controlled
Supply 110v or 240v AC 50/60Hz
Load 1500 watts
Overall dimensions 520mm Wide x 620mm Deep x 610mm High
Internal dimensions 455mm Wide x 470mm Deep x 455mm High
Weight empty 42 kilos
Capacity 136Kg of welding electrodes
Part No 110v 655259
Part No 240v 655258

 
HIGH TEMPERATURE OVEN - DIGITAL DISPLAY
The HT - DD baking oven is robustly made. It has accurate temperature control Over 0 - 500 Deg C. Visual temperature indication is by the digital display. Temperature settings are digitally set.

Temperature range 0 - 500 Deg C
Supply 240v AC 50/60Hz
Load 3000 watts
Overall dimensions 600mm Wide x 685mm Deep x 760mm High
Internal dimensions 470mm Wide x 470mm Deep x 470mm High
Weight empty 77 Kilo
Capacity 136Kg of welding electrodes
Part No 1380408

 
HIGH TEMPERATURE OVEN - DIGITAL DISPLAY WITH CHART RECORDER
The HT - DD + CR baking oven is robustly made. It has accurate temperature control over 0 - 500 Deg C, with 0 - 30 hour timer, 7 day programmable delay timer and chart recorder. The ovens are single phase and are suitable to use from usual 13 amp switched sockets.

Temperature range 0 - 500 Deg C
Supply 240v. 12.5 amps. AC 50/60Hz
Load 3000 watts
Overall dimensions 600mm Wide x 685mm Deep x 760mm High
Internal dimensions 470mm Wide x 470mm Deep x 470mm High
Weight empty 80 Kilo
Capacity 136Kg of welding electrodes
Part No 1380410

 
SPARE PARTS FOR DRYING OVENS AND QUIVERS

Part No. Description
1380149 Element Pk2 Stationary oven 240v
1380487 Element 110v Quiver
1380488 Toggle switch Quiver
1411237 Element 240v kit Portable oven
1411240 Thermostat 110/240v Portable and Stationary Ovens

 
ELECTRODE CARRIER

 
Part No. Description
1415693 Electrode Carrier
A robust plastic electrode carrier (unheated)