MUREX SERVICE MANUALS AND SERVICE BULLETINS

You can download various Murex Arc Equipment Service Manuals and Service Bulletins in this section.

You will need Acrobat Reader® to read pdf documents. If you do not have this on your system, you can download it below!


Click on the manual or bulletin you require for downloading

Service Manuals

Autolynx 161
Autolynx 3 - PCB Drawing
Autolynx 4i
PowerCut 650
PowerCut 875
PowerCut 1500
Sabre arc 25i
Sabre arc 35i
Sabre arc 40i
Sabre arc 50i & 80i
Sabre arc 60i
Site Rover DC300
 Tradesarc 131i
Tradesarc 141i
Tradesarc DC150-1
Tradesarc DC180-1
Tradesarc Dual 131i
Tradesarc Dual 141i
TradesMarc 151
Tradesmarc 181 / 243
Tradesmig 135 / 165 / 235 / 245 / 285
Tradesmig 263 / 323
Tradesmig 180-210-260-1
Tradesmig 280-3
Tradestig-Transtig DC150-1
Tradestig-Transtig DC200-1
Tradestig AC/DC 161i
Tradestig AC/DC 200S
Tradestig Dual 151i
Transarc DC 203i/303iE
Transarc DC400E / 630 / 800
Transarc OCVR
Transarc DC135 / 205
Transmatic 2x2 / 4x4 / 4x4HD / 4x4EHD
Transmatic 4C
Transmatic Lynx AVC
Transmatic Suitcase II-IV
Transmig 300C & 350C
Transmig 350i & 4x4P
Transmig 253 / 353 / 353W
Transmig 413S(W)-513S(W)
Transmig 403(W)-503(W)
Transmig 450i
Transmig 500 Synergic
Transtig 252 - 352 Calibration Procedure
Transtig AC/DC 201iS / 203iS / 353iS
Transtig AC/DC 203i & 353iS
Transtig AC/DC 205
Transtig AC/DC 250HF
Transtig AC/DC 252 / 352
Transtig AC/DC 275S / 375S
Transtig DC 160i/200i
Transtig DC250i
Transweld Challenger 400

Service Bulletin

Number Subject Date
167 PT80 & PT81 Electrode Design Change, now pointed 20.01.00
168 PT-80 & 81 - consumable part number changes 03.03.00
169 Tradestig AC/DC 161i - service notes attached 18.05.00
170 Autoswitch PCB drawing 1415492 is incorrect in manauls, corrected versions attached 28.07.00
171 N/A - out of date Eyetech returns procedure
172 MXW Super Cooled MIG Torches - design change to handle, now flaired 06.09.00
173 Tradesmigs - primary cable should be held clear of rear left hand wheel (when wheeling machine around) as rubbing against the wheel could leave live conductors exposed 11.09.00
174 Manuals for Sabre-arc 25i, Transarc DC201i & Transtig AC/DC 201i enclosed 25.09.00
175 Sabre-arc 25i - failure cause by HF pick-up on torch switch leads, details enclosed on how to cure the problem 25.09.00
176 Tradesmig 165,235,245 & 285 - Semipak replacement part numbers 08.01.01
177 Labour/Travel Rates increase plus attached policy document 08.02.01
178 N/A - out of date Service Exchange procedure
179 Eye-Tech units 175 & 140 - warranty replacement procedure & leaflet 27.03.01
180 Autolynx 4i - updated service manual attached 30.01.02
181 PT-27/81 Plasma torches - new spring loaded electrode seat intro. + diagram showing how it is fitted to torch 14.02.02
182 New Transmig333S/403S/Transmatic Lynx 2-4EHD intro + sales literature 03.05.02
183 N/A - out of date Service Exchange procedure
184 Warranty Repair Report, instructions how to fill in warranty form correctly 08.10.02
185 Eyetech lens - change in warranty procedure 13.01.03
186 Transmig 423S/523S - manuals sent out 07.03.03
187 N/A - out of date Service Exchange procedure
188 TM186T/191/251/253/313 & Sabre-arc 351i & 351iAS - Manuals sent out 14.05.03
189 Transtig AC/DC201iS,203iS,353iS - manual & service notes - sent out 11.05.04
190 Transtig AC/DC201iS,203iS,353iS - correct pt. no's. for Micro Pro. PCB's as these are incorrect in manual 19.05.04
191 Service Exchange PCBs pt. no's, prices & return procedure 10.08.04
192 Service Exchage PCBs - change of procedure 30.03.05
193 Revised Recommended Spare Parts List - Service Centres to hold stock 30.03.05
  Attachment for subject 193  
194 New Equipment - Service Notes, Manual & Part Lists on Website 11.07.05
195 Transtig AC/DC201iS,203iS,253iS & 353iS - When changing DC/AC Com PCB also change the Com Driver PCB

26.08.05
196 Revised Recommended Spare Parts List - Service Centres to hold stock

26.09.05
  Attachment for subject 196  
197 Tradesmig 140-1/180-1/210-1/260-1/280-3 - Thermostat now mounted externally 24.09.07
198 Tradestig DC145 20.07.09
     
Number Subject Date
 
GROUP SERVICE BULLETIN
 
001 Updated Group Policy Document - sent via Royal Mail 28.09.07
002 AristoArc, MIG, Tig - change to large control PCB - 20AP1 16.04.08
003 Recently Introduced Murex Arc Equipment - all Service info on website 10.06.08
004 Recommended Spare Parts Lists - Service Centres to hold stock 18.08.08
005 New ESAB Ltd Equipment Introduced September 2008 06.10.08
006 Aristo/Origo Wire Feed Units 3004,4008 (AristoFeed 30-4 & 48-4)PCB part no's. for different serial numbers 20.05.09